UniTrain Course – Lift model with three stories

ABOUT THIS PRODUCT:

Real model of an elevator with cabin for 3 floors and integrated PROFIBUS DP slave. Each floor can be selected from an operating panel and from each floor. Thanks to the open design of this model, each movement sequence can be checked visually. The cabin and the doors on the individual floors are driven by electric motors. Each end position is detected by initiators. All inputs for driving the electric motors and LEDs and all outputs of the feedback signals are connected to the IMS-Connector.

• 14 digital inputs
• 11 digital outputs
• EMERGENCY OFF pushbutton
• Control elements for each floor
• 1 x Sub-D, 25-pole
• 1 x Sub-D, 9-pole
• Power supply: DC 24 V /0.5 A
• Dimensions: 726 x 340 x 125 mm (HxWxD) Depth base: 262 mm
• Weight: 4.2 kg

Integrated PROFIBUS DP slave:

• Address range:16 digital input/outputs
• PROFIBUS DP connector: 9-pin DSUB socket
• Rotary switch for setting address
• Transmission rates of up to 6 Mbit/s
• GSD file for use with control software (e.g.: STEP7)